Announcement

Collapse
No announcement yet.

Next question?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Next question?

    This next cpu block from aguacomputer has a thin 5 pin connection on the end of the cable from cpu block. What would I plug that into, ie: not an aquaro 5-6 idea, on my motherboard am referring too? Need an adapter?
    Blackout
    Something-New
    Sma8-Caselabs

  • #2
    If Cuplex Kryos Next Vario with Vision is the block your talking about, then I think you need this PDF to properly explain hook up options of the VISION system
    Vision
    Last edited by Hooded; 04-13-2018, 11:11 AM.
    Blue Dragon CM690 II an i7 - 960 x58 build
    OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.

    Comment


    • #3
      USB I belive?
      __________________________________________________ ___________________
      Baby Blue Build: Build Log,
      Green Lanten Build: Build Log,
      Sentinel Build: Build Log,
      Venom Build: Build Log,
      Silent Sniper Build: Final Video,
      Orange Build: Final Video
      HTPC Build: Final Video
      __________________________________________________ _______________________________

      Comment


      • #4
        Just looks so thin but yes is supposed to do water temp default without a 5 or 6 aqua.
        Last edited by nass; 04-13-2018, 07:49 PM. Reason: cant spell
        Blackout
        Something-New
        Sma8-Caselabs

        Comment


        • #5
          Originally posted by Hooded View Post
          If Cuplex Kryos Next Vario with Vision is the block your talking about, then I think you need this PDF to properly explain hook up options of the VISION system
          Vision
          Hey Hooded I have the next vision. You know in the manual it says dick about the cable though but sometimes things get lost in the translation with AC I notice sometimes.
          Blackout
          Something-New
          Sma8-Caselabs

          Comment


          • #6
            [IMG][/IMG]

            I know the pic sucks, have the vision cpu plugged into the left of the 2 pictured usb headers, this thing is only 1/2 the thickness of a normal usb, wiring on the one on the right looks simuler on the upper side but the left one from vision has 2 more black wires on the upper section that the usb on the right doesn't have.
            Am hoping not to fry the display or my board with this, lol.
            Sent a message to Shoggy on ocn hopefully he'll get back to me before I finish my bends lol. ( will not power it till I know for sure though)
            Last edited by nass; 04-14-2018, 07:14 AM.
            Blackout
            Something-New
            Sma8-Caselabs

            Comment


            • #7
              Look for a triangle on the connector. That should be pin #1 of the USB port.
              Blue Dragon CM690 II an i7 - 960 x58 build
              OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.

              Comment


              • #8
                There is a small triangle on the red wire side
                Blackout
                Something-New
                Sma8-Caselabs

                Comment


                • #9
                  Thx Hooded
                  Blackout
                  Something-New
                  Sma8-Caselabs

                  Comment


                  • #10
                    So my pic is right then pin one is to the left on my board
                    Blackout
                    Something-New
                    Sma8-Caselabs

                    Comment


                    • #11
                      Blackout
                      Something-New
                      Sma8-Caselabs

                      Comment


                      • #12
                        so am confused now seems it goes on the 4 pin lower section to be pin 1 ? yet connector is a 5 pin from AC.
                        Blackout
                        Something-New
                        Sma8-Caselabs

                        Comment


                        • #13
                          Aqua Computer USB Pin assignment.

                          Pin 1 not connected
                          Pin 2 GNO (black)
                          Pin 3 0+ (green)
                          Pin 4 0- (white)
                          Pin 5 +5 V (red)

                          Typical USB pinout has one pin not in use when only a half a connector is in use.

                          Go with the colours as the pins # seems to be for the Vision PCB not the header on the motherboard
                          Last edited by Hooded; 04-14-2018, 12:51 PM.
                          Blue Dragon CM690 II an i7 - 960 x58 build
                          OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.

                          Comment


                          • #14
                            so the red on my AC connector should go how and where into my motherboard usb 2 header using the red wire as the reference?
                            Blackout
                            Something-New
                            Sma8-Caselabs

                            Comment


                            • #15
                              The Red is the 5-volt wire and has the triangle. Should be pin #1 on your mother board.
                              Blue Dragon CM690 II an i7 - 960 x58 build
                              OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.

                              Comment

                              Working...
                              X