Fujipoly Sarcon® Extreme-performance Thermal Pad – 3.0mm 13mk/W

Description

The new 13 Watt Sarcon^®  Thermal Gap Filler Pads are highly conformable and high heat-conducting gel materials in a versatile sheet form. They easily fit and adhere to most all shapes and sizes of components, including protrusions and recessed areas. This significantly increases surface contact with a heatsink and improves cooling performance.

Specification:

• Thermal conductivity: ASTMD 5470 test  13.0 W/m°K (No compression Hot Disk test 8.0 W/m°K)
• Withstand Voltage: 15 kV/min
• Volume Resistivity: 1.0×10¹¹ MΩ•m
• Thickness: 3.0mm ± 0.1mm
• Sheet size: ~ 100x50mm
• Surface: sticky surface
• Useful Temperature: -40 to +150 ℃
• Colour: Light Gray
• Made in Japan

Handling:

• Keep pads in the sealed package to protect from dirt and drying up.
• It is recommended to use the material in up to 30% of the compression ratio.
• It is recommended to compress the material with an equal ratio on the whole surface. Partial excessive stress may also result in excessive silicone oil exudation.