Shop Products

EK-Quantum Vector FTW3 RTX 3070 D-RGB – Nickel + Acetal

EK-Quantum Vector FTW3 RTX 3070 D-RGB – Nickel + Acetal

Manufacturer: EKWB

$ 259.60

SKU: 3831109836422

2 in stock

2 in stock

Description

This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for EVGA® FTW3 RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.

An EK Water Block for FTW3 RTX 3070

EK-Quantum Vector FTW3 3070 D-RGB water block is compatible with FTW3 RTX 3070 graphics cards. The Vector water block actively cools the GPU, VRAM, power stages, and chokes in the VRM (voltage regulation module).

EK Water block for the EVGA RTX 3070 FTW3 GPU

These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them.

The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation.

The fin array is populated by 28 microfins with 0.6mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards.

 

The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable POM acetal. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB lighting on EK-Quantum Vector FTW3 RTX 3070 D-RGB water block

EK Vector RGB compatibility

The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.

Backplate for the EK-Quantum Vector FTW3 3070 water block

EK recommends the purchase of a retention backplate, especially for the 3070 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, and backside of the printed circuit board VRM section.

Enclosed:

– EK-Quantum Vector FTW3 RTX 3070 D-RGB series high-performance water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x Nickel plated brass plug G1/4”
– EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

Technical Specification:

– Dimensions: (LxHxW) – 314x155x21mm

PLEASE NOTE:

  • Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • Factory backplates are not compatible with this water block!
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!
  • The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block! EK is offering a selection of such products in the coolants section.

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “EK-Quantum Vector FTW3 RTX 3070 D-RGB – Nickel + Acetal”

YOU ALSO MIGHT BE INTERESTED IN

ONLY REAL STOCK

We only sell products that we have physically in stock, unless specifically stated in title as pre-order or other reason.

FAST SHIPPING

Your order shipped in two business days or faster. Many simple orders shipped the same day when paid before noon.

THE BEST PRODUCTS

We offer the best-performing and reliable products and routinely weed out the products with known issues.

REVIEWS & TUTORIALS

Watch How-to Playlists, Tutorials, Product Reviews and Fun Experimentations from the library of 500 videos on YouTube.

Vacation Alert!

We are closed till April 7th.

Orders placed during our vacation break will be processed on a first-come-first-served basis on April 8th.

JOIN US ON YOUTUBE

DazMode has over 450 YouTube Tutorials, Product Reviews, Experimental Tests and Guides to help make your next project…UBER COOL.