EK-CoolStream CE is a high-performance computer liquid cooling radiator which combines EK’s unique CSQ design with latest radiator core engine. Built for EK-Vardar 140mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation.
EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream CE series radiators a perfect choice for any computer water cooled system.
This radiator offers best cooling capacity in the 45mm thick radiator class: Dual stack copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance.
This product features two recessed G1/4 threaded ports with pre-installed extenders to allow any G1/4 threaded fitting to be used. EK recommends EK-ACF series compression fittings.
– Copper fins
– 90% copper tubing (H90)
– Brass chambers
– Aluminum/Steel housing
Dimensions: 180 x 145 x 45mm (L x W x H)
Liquid Capacity: ~200mL
Port threads: 2x G1/4
Fan compatibility: any standard size 140x140x25mm fan; UNC 6-32 thread tapping
Pressure tested: 1bar(g)
– EK-CoolStream CE series radiator /w two pre-installed G1/4 extenders
– Flat-head UNC 6-32 screws (l=30mm)
– Flat-head UNC 6-32 screws (l=5mm)
– Allen key 2,5mm
– Allen key 9mm
– When using fans other than standard 140x140x25mm size please use appropriately long screws!
– Use of the improperly long screws may result in piercing of the radiator core and irrepairable damage the product. Such misuse is not covered by product warranty!