EK-CoolStream PE 360 (Triple 120mm Core Radiator) PE

$CAD 110.99

Part Number: 9860274
Left In Stock: 4

Product Description


EK-CoolStream PE is a high-performance computer water-cooling radiator which combines EK's unique CSQ design with latest radiator core engine. Built for 120mm fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation.

EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream PE series radiators a perfect choice for any computer water cooled system.

This radiator offers best cooling capacity in the 40mm thick radiator class: Double stack copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance.

This product features two recessed G1/4 threaded ports with pre-installed extenders to allow any G1/4 threaded fitting to be used. EK recommends EK-CSQ series compression fittings.

Technical details:
- Copper fins
- 90% copper tubing (H90)
- Brass chambers
- Aluminum housing

Dimensions: 400 x 130 x 38mm (L x W x H)
Weight: 1.02kg
Liquid Capacity: ~200mL
FPI: 38
Port threads: 2x G1/4
Fan compatibility: any standard size 120x120x25mm fan; UNC 6-32 thread tapping
Pressure tested: 1bar(g)

- EK-CoolStream PE series radiator /w pre-installed G1/4 extenders
- flat-head UNC 6-32 screws (l=30mm)
- flat-head UNC 6-32 screws (l=5mm)

Add to Wishlist


Great Radiator - By Clayton A at 01/26/2015

Definitely a great radiator when tied with high pressure performance fans like the Scythe GT (Now DarkSide GT). The FPI is due to two water channels at 19 FPI each, essentially providing the cooling capacity of a single channel 38 FPI radiator. Currently using this one and the EK-CoolStream PE 240 in a HAF 932 (first gen) to cool two AMD R9-290X, an AMD FX-9590 and the CrossHair 5 Formula-Z. All radiators are using pull for cooling as I found with the Scythe GT there was no need to run these using push/pull in this case as it did not increase the pressure in the radiators nor improved the cooling. Will be trading out the PE 240 for a PE 360 soon once I add my memory into the cooling loop.

Excellent Cooling - By Ryan F at 10/16/2015

I can't complain about the cooling performance and it is quite aesthetically pleasing. My only complaint would be that with the higher FPI it collects a lot of dust. There is obviously nothing that can be done about that though.

Excellent Cooling Power - By Tommy V at 09/23/2016

Pro's - Cools your custom loop like you couldn't imagine - i5-3570K @ 4.5Ghz stays under 55C - GTX780Ti stays under 38C. Yes, you read that right: 38C. - Both specs above under FULL load Con's - Fins are very, very fragile (although, this is true for every radiator ever, so be SUPER careful when handling, cleaning, installing etc.)

Nice and excellent rad - By liza-marie s at 11/07/2016

I use this rad in top of my thermaltake x71 paired with 3x 120mm riing rgb. Great cooling.

Write a review!