Daz’ note: This option is for somebody why want real thing over fake chinese antistatic mats available everywhere. You wont get cool pictures, but will gain ESD protection.
The SpecMat-H homogeneous material is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Without adding cost, the extruded manufacturing process used to produce this high-performance vinyl utilizes superior plasticizers and lower-outgassing solvents, unlike ESD vinyl made by cast coating.
The proprietary polymers used to manufacture this material are homogeneously dispersed with a migratory anti-static formula that allows for both surface and volume resistance. By design, anti-static properties cannot be worn away through wear or outgassing.
Resistant to solder, heat, and most common solvents, SpecMat-H is an economical choice for static- sensitive production areas in electronics manufacturing and laboratories. Tray mats can be custom-cut with a sharp blade. Scraps can be recycled. Blended with hydrophilic molecules to control the speed of dissipation, the ESD-Homogeneous material will deliver a typical resistance-to-ground measurement of 108 -109 ohms per ANSI/ESD S4.1. ESD-Homogeneous material complies with industry standards including EN 61340-5-1: Protection of Electronic Devices from Electrostatic Phenomena and ANSI ESD S20.20: Protection of Electrical and Electronic Parts, Assemblies and Equipment.
- 0.10” (2.54 mm) thickness
108 – 109 ohms, ohm per cm RTG, RTT, Vol R
Can be custom-cut with sharp blade; scraps are recyclable
Embossed finish reduces light glare and parts slippage
Durable surface withstands high temperatures, solder, flux, and harsh chemicals
Low outgassing and VOC are ideal for controlled environments
Passes weathering ozone resistance per ASTM D178-01
Passes and exceeds minimum standards for NFPA fire and smoke safety
UV additives to protect color and eliminate fading
Product of USA