EK-Vector RTX 2080 Ti RGB – Nickel + Acetal

3 out of 5 based on 1 customer rating
(1 customer review )

$ 225.77 $ 217.99

  • SKU: 9810484
  • Brand: EKWB

2 in stock

Description

The EK-Vector high-performance water block is specially designed for multiple NVIDIA® GeForce® RTX Turing based graphics cards. The water block itself uses the signature EK® single slot slim look, and it covers the entire PCB length. This sophisticated cooling solution will transform your beefy graphics card into a minimalistic, elegant piece of hardware. The block also features a unique aesthetic cover over the block Terminal which is designed to reveal the graphics card model, visible from the side.

This water block is compatible with all reference design GeForce RTX 20×0 based graphics cards, but as always, we recommend that you refer to the EK® Cooling Configurator for a precise compatibility match.

The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks.

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality black POM Acetal. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with LED strip and can be easily removed to replace the LED strip with your preferred solution. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.

EK RGB All

EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section.

G1/4″ threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of GPU Terminals.

The NVIDIA® NVLink is compatible with this water block.

Enclosed:

– EK-Vector series high-performance water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x Nickel plated brass plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

 

Customer reviews

Rated 3 out of 5 stars
1 review
5 stars 0 0 %
4 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 review for EK-Vector RTX 2080 Ti RGB – Nickel + Acetal

  1. 1 out of 5

    Do not waste your money of these fittings they utter garbage should be sold at 1 dollar a piece experienced so many leaks with these fittings are straight ripoffs

    Was this review helpful to you? 0 of 0 people found this review helpful

  2. 3 out of 5

    (verified owner)

    Color is incredible, look is awesome, It was really cool in my pc with my distribution plate.

    Was running since November (so trouble free for 3 month) and it suddenly, in 2 or 3 days, created a gunk and clogged up all my water blocks and radiator. It's been 2 days since I started to clean all and haven't finish yet...

    Don't know why, i cleaned the system properly before putting it in, 90% of the part were new so never had another coolant in it (still cleaned them), been perfect for 3 month.

    From what I saw on internet, despise the fact that It should be compatible with PETG, which I have, all problem with Mayhems pastel seem to happens on system that uses PETG. That's the reason I gave 3 star, because i can't says that the problem is the coolant, most likely the fact that Mayhems pastel isn't really compatible with PETG even if Dazmode says so.

    Will probably switch to acrylic when i'll upgrade my PC this summer, will give it another try because as I said, the color is awesome.

    Was this review helpful to you? 0 of 0 people found this review helpful

  3. 3 out of 5

    (verified owner)

    Sorry for the picture quality, that's the only one I have before having trouble

    Color is incredible, look is awesome, It was really cool in my pc with my distribution plate.

    Was running since November (so trouble free for 3 month) and it suddenly, in 2 or 3 days, created a gunk and clogged up all my water blocks and radiator. It's been 2 days since I started to clean all and haven't finish yet...

    Don't know why, i cleaned the system properly before putting it in, 90% of the part were new so never had another coolant in it (still cleaned them), been perfect for 3 month.

    From what I saw on internet, despise the fact that It should be compatible with PETG, which I have, all problem with Mayhems pastel seem to happens on system that uses PETG. That's the reason I gave 3 star, because i can't says that the problem is the coolant, most likely the fact that Mayhems pastel isn't really compatible with PETG even if Dazmode says so.

    Will probably switch to acrylic when i'll upgrade my PC this summer, will give it another try because as I said, the color is awesome.

    Was this review helpful to you? 0 of 0 people found this review helpful

  4. 5 out of 5

    Great productI used this flow meter in several "friends & family" builds and it always was a solid choice.

    Was this review helpful to you? 0 of 0 people found this review helpful

  5. 5 out of 5

    Great productI used this flow meter in my test bench with FM01 display and it worked great. Will be re-using it in one of the future builds.

    Was this review helpful to you? 0 of 0 people found this review helpful

Add a review

You have not viewed any product yet.